Ninja 1000SX Tourer

Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.

Stylish seat cover to enhance the sporting appearance of the bike. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja 1000SX

Help protect your motorcycle from tip-over damage.

• High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets
• Includes required brackets, hardware and installation instructions
• Frame Sliders help protect your motorcycle but will not prevent all types of damage

Give your Kawasaki Ninja 1000SX a more sporty look with the hexagonal shaped Carbon Akrapovič muffler. This lightweight slip-on is designed to be used together with our pannier system. Consists of a stainless steel inlet, carbon fiber muffler outer sleeve, carbon fiber end cap, Carbon fiber muffler clamp and a Co-branded Akrapovič heat resistant sticker. Carbon fiber heatshield set and fitting kit included. Complies with the applicable European standards.

This low seat is slimmer which makes it easier to touch the ground whilst standing still.
For the MY17-MY19 Z1000SX it is 8 mm lower then the original seat.
For the MY20-> Ninja 1000SX it is 28 mm lower then the original seat.

Genuine Kawasaki chain kit containing engine Sprocket, washer, rear sprocket, nuts and cotter pin etc.
This complete package from Kawasaki contains all the qualified genuine parts required for correct drive chain replacement for popular models.
Compared to aftermarket kits, the genuine kits have the advantage of a rubber coated front sprocket, that will make the chain operation much more quiet. Somebody who has been running an aftermarket kit will know this difference.
The new chain kits have the recognizable green Kawasaki branded packaging.

Stylish 2-piece set of covers, to accentuate the jagged-edge design of the bike's clutch and alternator.

Solid, easy to install bracket for your navigation system with rubber damping bushes to protect your GPS system from vibrations.
Homologated with motorcycle type approval. Bracket can be adjusted for optimal viewing angle.
Fits most navigation systems.

These protective front axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.

USB-A female 5V output for underneath the rear seat to charge your phone or other electric devices.

Give your Kawasaki a more sporty look with the hexagonal shaped Titanium Akrapovič muffler.
This lightweight slip-on is designed to be used together with our pannier system.
Consists of a stainless steel link pipe, stainless steel inlet/ titanium muffler outer sleeve, carbon fiber end cap, Carbon fiber muffler clamp and dual Akrapovič and Ninja 1000SX branded laser etched logo.
Carbon fiber heatshield set and fitting kit included.
Complies with the applicable European standards.

Two-piece Gel Seat provides long-distance support and comfort for rider and passenger.

• 15mm increased driver seat heigh over stock
• Gel insert in both sections evens out seating pressure
• Cover construction features low-heat gain material allowing for significantly reduced heat absorption after long periods of sun exposure
• Seat cover features contrasting side material and stitching with Kawasaki logo
• 100% complete for replacement of the stock seat
• Uses factory seat base and components for a factory fit

Tank pad to add protection against scratches.

Solid, easy to install bracket for your navigation system.
Fits most common current navigation systems.

Heavy Duty Outdoor Cover - Medium

Strong durable multi layered fabric with taped seams. Heat resistant honeycomb till 120 degrees Celcius. Subtle Branding.
Two front and two rear holes for lock. Covered ventilation openings for better breathing. Window with cover to hide or show license plate.
100% Polyester. With multi usable packing backpack.

Solid, easy to install genuine bracket for your navigation system.
Fits most common current navigation systems.

Developed in conjuction wih SP Connect the kit consists of a Clutch Mount, Anti-vibration module and a Universal Phone Clamp. Suits mosts mobile phones; Simply pull out the crown, screw it tight, and then push the crown back in to lock your phone in place. While remaining fully operable, your phone can now be attached to or detached from the mount in seconds.

Stylish wheel rim tape to complete the sporty looks of your bike. (Set of four rings for one bike)

Bike cover made from breathable heavy-duty non-woven ripstop material. Kawasaki specific with green honeycomb design elements Easy reach lock buckle. 100% Polyester. With multi usable storage bag.

Mounting points for paddock stand, providing stability during maintenance or storage. The bobbins are securely attached to the motorcycle's swingarm, allowing for easy and safe lifting of the bike.

CNC machined billet aluminium Oil Filler Cap with gold finish Note: Compatibility and availability of accessories may vary per specific model year, please check with your Kawasaki Dealer on availability and additional parts needed for installation

Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)

Discover your next adventure
Ride challenge level. Plan windy and hilly roads
Discover the world's best curated riding routes, exclusively
Updates via Wi-Fi®. No computer needed
Discover, personalize and enjoy stunning riding routes with MyDrive
Compatible with Siri and Google Now™
Smartphone messages read aloud, hands-free calling
Lifetime* Worldwide Maps, TomTom Traffic and Services
Double the processing speed and five times faster start-up

An essential tool for motorcycle enthusiasts and mechanics alike. Designed to provide stability and convenience, this paddock stand allows easy access to the wheels, suspension, and other components.

This premium rear bike stand can be disassembled, making transportation a lot easier. The compact bike stand comes in a shop worthy carrying case with a built-in carrying handle. The stand is made of premium steel and has a green and black finish. The Kawasaki logo is laser cut in steel.

Optional are the forks to suit your preference;

• The Y-forks are to be used in combination with bobbins. (163JAY0021)
• The L-forks can be used to support the rear swing arms. (163JAY0022)