Versys 1000 SE Tourer

Mount your GPS for minimal vibration and maximum convenience.

• The flat mounting surface is designed to position the GPS within the rider’s direct line of sight above the instrument panel
• Fits all common current navigation systems

Rugged and aerodynamic dual LED Light Bar provides additional lighting for improved visibility.

• Integrates into the front headlight area
• Reflector Facing Technology (RFT) allows for optimum LED output while consuming far less power than conventional LED or halogen bulbs
• Steel bracket with high-impact plastic light housings
• Dealer installation recommended

Help protect your vehicle’s bodywork with sturdy Kawasaki branded Frame Sliders.

• Slide pads are made from polyurethane plastic for increased durability
• Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage
• Dealer installation recommended

Solid, easy to install genuine bracket for your navigation system.
Fits most common current navigation systems.

Up and down quick shifter. Standard for Versys 1000 SE.
Requires KVCI tool. Please ask your local dealer.

Solid, easy to install bracket for your navigation system.
Fits most common current navigation systems.

Top Case (47L) Base Plate for all Versys 1000 models.
Purchase the this base plate as a required component to install the 47L Top Case.

Aluminium alloy laser cut radiator cover for design and protection of your bike.

Add more protection with front axle sliders. These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.

Rider seat area is 20mm lower and narrower than standard, providing sure footing.

Akrapovič Black Titanium Slip-on type exhaust.
A combination of racing materials like titanium for the muffler outer sleeve and carbon fiber end cap give this exhaust system a racing touch. This homologated exhaust system is compliant with Euro 4 and Euro 5 regulations (emissions and noise) and has EC type-approval. The heat shield is included.

Required component of KQR 47 Litre Top Case (99994-0899) (sold separately)

• Includes (1) lock cylinder and all required hardware
• Note: Authorised Kawasaki dealer installation required.
• Ninja 1400GTR owners must reference their vehicle ignition key to determine if a Type A or Type B One Key System is required

Top Case (47L) Aluminium Deco Plates

For optimal passenger riding comfort. Features a faux leather stitched cover with a quality feel.

Keep your personal items in 47 liters of lockable, waterproof storage; enough room for two full-face helmets. Requires Base Plate and model specific accessories.

• Kawasaki’s One Key System allows you to key the lock to your ignition key – refer to the letter on your key to determine if your need a Type A or Type B system.
• Kawasaki logos and factory-matched trim give your bike a customized look
• Constructed of molded ABS plastic
• Requires Carrier Plate, Color Panel, Deco Plate, and One Key System all sold separately
• Dimensions 432mm (17”) L x 584mm (23”) W x 305mm (12”) H
• Top Case load limit is 5kg (11 lbs.)
• On the Ninja 1000 SX, the Top Case (47L) is not compatible with panniers.

Top Case (47L) Aluminium Deco Plates

Rigid, water-resistant bag with compartments makes it easy to pack your cargo and drop into the locking Top Case. Once you have arrived at your destination, just grab your packed Inner Bag so you can leave the Top Case on your motorcycle and get going.

• Nylon construction with reflective piping
• Purchase as an optional component of the Top Case (42-47L), sold separately

Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)

4-Way super stretch material. Reinforced bottom.

Developed in conjuction wih SP Connect the kit consists of a Clutch Mount, Anti-vibration module and a Universal Phone Clamp. Suits mosts mobile phones; Simply pull out the crown, screw it tight, and then push the crown back in to lock your phone in place. While remaining fully operable, your phone can now be attached to or detached from the mount in seconds.

4-Way super stretch material. Reinforced bottom.

Discover your next adventure
Ride challenge level. Plan windy and hilly roads
Discover the world's best curated riding routes, exclusively
Updates via Wi-Fi®. No computer needed
Discover, personalize and enjoy stunning riding routes with MyDrive
Compatible with Siri and Google Now™
Smartphone messages read aloud, hands-free calling
Lifetime* Worldwide Maps, TomTom Traffic and Services
Double the processing speed and five times faster start-up

Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)

Whether you want to park your bike in a pitbox or in your garage, let your precious machine rest in style on this Kawasaki Garage Mat. The mat meets new FIM environmental codes and offers a high level of absorption and dust-control features.

• Size 100cm x 200cm
• Pile weight ± 300 gr/m²,
• Total height ± 5 mm,
• 30°C washable (no tumble-dry)

An essential tool for motorcycle enthusiasts and mechanics alike. Designed to provide stability and convenience, this paddock stand allows easy access to the wheels, suspension, and other components.

This premium rear bike stand can be disassembled, making transportation a lot easier. The compact bike stand comes in a shop worthy carrying case with a built-in carrying handle. The stand is made of premium steel and has a green and black finish. The Kawasaki logo is laser cut in steel.

Optional are the forks to suit your preference;

• The Y-forks are to be used in combination with bobbins. (163JAY0021)
• The L-forks can be used to support the rear swing arms. (163JAY0022)